Active Machinery
1-800-377-7553
1001 Investment Blvd.
Apex, NC 27502
Active Machinery
1-800-377-7553
1001 Investment Blvd.
Apex, NC 27502
Active Machinery
1-800-377-7553
1001 Investment Blvd. - Apex, NC 27502

2D Laser System Machinery List

45 Available

15706: Mitsubishi | 1997 | LXP-2512 | 3000 Watts, 4' x 8'

Mitsubishi 32 Bit CNC Controls, Mitsubishi 3000 Watt Resonator, Dual Pallet Shuttle Tables, Chiller Unit, Dust Collector.. MACHINE HAS 55,000 POWER ON HOURS AND 28,000 BEAM ON HOURS

15802: Bystronic | 2004 | Bystar 4020 | 4400 Watt, 6' x 12'

Bystronic PC Based Controls, Bystronic 4400 Watt Resonator, Rack and Pinion Drives, 6' x 12' Dual Pallet Shuttle Tables, Non-Contact Cutting Head, Chiller Unit, Dust Collector.

16170: Amada | 2007 | LC1212α IV NT | 4000 Watts, 4' x 4'

AMNC NT CNC Controls, Fanuc 4000 Watt Resonator, Non-Contact Cutting Head, Oversized Trap Door, Chiller Unit, Dust Collector. Note: Machine has 17,500 power on hours. New 24,000 Hour Turbo installed at 13,000 Hours- New Optics in Boxes

16186: Bystronic | 2001 | Bystar 4020 | 4000 Watt, 6' x 12'

Bystronic PC Based Controls, Bystronic 4000 Watt Resonator, Rack and Pinion Drives, 6x12 Dual Pallet Shuttle Table, Chiller, Dust Collector. Machine has 21,600 Hours

16207: Mazak | 2000 | STX48 Hi Pro | 2500 Watts, 4' x 8'

Mazak CNC Controls, Panasonic 2500 Watt Resonator, Chiller Unit.

16262: Mazak | 2014 | Optiplex 3015 | 4000 Watt, 5' x 10'

Mazak Preview 3 CNC Controls, 5x10 Dual Pallet Shuttle Tables, 4000 Watt Resonator, Rack & Pinion Drive, 4,700 IPM Rapid Speed, High Accuracy Nozzle Kit w/8 Nozzles & Adapters, Servo Focus Torch Assembly, Chiller Unit, Robovent Dust Collector. Machine has 8,700 Power On Hours

16297: Hankwang | 2008 | FS 4020 | 4000 Watts, 6' x 13'

Siemens PC Based CNC Controls, Panasonic 4000 Watt Resonator, 6' x 13' Dual Pallet Shuttle Tables, Automated Load/Unload, Non-Contact Auto Focus Cutting Head, Constant Beam Length, High Pressure Assist Gas, Quick Pierce & Multi Piers Modes, Chiller Unit. Machine has approximately 41,000 hours.

16354: Prima | 2008 | Platino 3015 | 4000 Watts, 5' x 10'

Primac 20L PC Based CNC Controls, 4000 Watt Laser, Dual Pallet Shuttle Tables, Non-Contact Cartridge Style Cutting Head, 5" and 7.5" Focal Lens, Programmable Assist Gas, Chiller Unit, Fume Blower. MACHINE HAS 17,600 LASER ON HOURS & 9,700 BEAM ON HOURS-

15706: Mitsubishi | 1997 | LXP-2512 | 3000 Watts, 4' x 8'

Mitsubishi 32 Bit CNC Controls, Mitsubishi 3000 Watt Resonator, Dual Pallet Shuttle Tables, Chiller Unit, Dust Collector.. MACHINE HAS 55,000 POWER ON HOURS AND 28,000 BEAM ON HOURS

15802: Bystronic | 2004 | Bystar 4020 | 4400 Watt, 6' x 12'

Bystronic PC Based Controls, Bystronic 4400 Watt Resonator, Rack and Pinion Drives, 6' x 12' Dual Pallet Shuttle Tables, Non-Contact Cutting Head, Chiller Unit, Dust Collector.

16170: Amada | 2007 | LC1212α IV NT | 4000 Watts, 4' x 4'

AMNC NT CNC Controls, Fanuc 4000 Watt Resonator, Non-Contact Cutting Head, Oversized Trap Door, Chiller Unit, Dust Collector. Note: Machine has 17,500 power on hours. New 24,000 Hour Turbo installed at 13,000 Hours- New Optics in Boxes

16186: Bystronic | 2001 | Bystar 4020 | 4000 Watt, 6' x 12'

Bystronic PC Based Controls, Bystronic 4000 Watt Resonator, Rack and Pinion Drives, 6x12 Dual Pallet Shuttle Table, Chiller, Dust Collector. Machine has 21,600 Hours

16207: Mazak | 2000 | STX48 Hi Pro | 2500 Watts, 4' x 8'

Mazak CNC Controls, Panasonic 2500 Watt Resonator, Chiller Unit.

16262: Mazak | 2014 | Optiplex 3015 | 4000 Watt, 5' x 10'

Mazak Preview 3 CNC Controls, 5x10 Dual Pallet Shuttle Tables, 4000 Watt Resonator, Rack & Pinion Drive, 4,700 IPM Rapid Speed, High Accuracy Nozzle Kit w/8 Nozzles & Adapters, Servo Focus Torch Assembly, Chiller Unit, Robovent Dust Collector. Machine has 8,700 Power On Hours

16297: Hankwang | 2008 | FS 4020 | 4000 Watts, 6' x 13'

Siemens PC Based CNC Controls, Panasonic 4000 Watt Resonator, 6' x 13' Dual Pallet Shuttle Tables, Automated Load/Unload, Non-Contact Auto Focus Cutting Head, Constant Beam Length, High Pressure Assist Gas, Quick Pierce & Multi Piers Modes, Chiller Unit. Machine has approximately 41,000 hours.

16354: Prima | 2008 | Platino 3015 | 4000 Watts, 5' x 10'

Primac 20L PC Based CNC Controls, 4000 Watt Laser, Dual Pallet Shuttle Tables, Non-Contact Cartridge Style Cutting Head, 5" and 7.5" Focal Lens, Programmable Assist Gas, Chiller Unit, Fume Blower. MACHINE HAS 17,600 LASER ON HOURS & 9,700 BEAM ON HOURS-